 |
| Quantity: | |
|---|---|
Glass fiber (GF)
Food and Beverage
The FBG series filter cartridge is made of ultrafine glass fiber. It’s high throughput, high adsorption characteristics. The adsorption and filtration of oil and gel substances is excellent. It has obvious advantages in filtering inorganic glass materials and organic solvent chemicals.
Features and Benefits
High dirt-holding and excellent particle retention efficiency
Cost-effective and long service life
Especially suitable for pre-treatment of liquids containing colloids and high viscosity
Application
Sterilization filtration of beer and red wine
Sterilization filtration of mineral water and pure water
Sterilization filtration of soft drinks
Materials of Construction
Filter Media: Glass fiber
Cage & Support & End Caps: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.38 m2 /10”
Dimensions
Outer Diameter: 68mm
Length（in）: 10, 20, 30, 40
Removal Ratings (μm)
0.45, 1.0, 3.0, 5.0
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FBG | 045=0.45 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
1=1.0 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
3=3.0 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
5=5.0 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | |||
F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | |||
G=215/Flat | M=PTFE gasket (soft) |
The FBG series filter cartridge is made of ultrafine glass fiber. It’s high throughput, high adsorption characteristics. The adsorption and filtration of oil and gel substances is excellent. It has obvious advantages in filtering inorganic glass materials and organic solvent chemicals.
Features and Benefits
High dirt-holding and excellent particle retention efficiency
Cost-effective and long service life
Especially suitable for pre-treatment of liquids containing colloids and high viscosity
Application
Sterilization filtration of beer and red wine
Sterilization filtration of mineral water and pure water
Sterilization filtration of soft drinks
Materials of Construction
Filter Media: Glass fiber
Cage & Support & End Caps: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.38 m2 /10”
Dimensions
Outer Diameter: 68mm
Length（in）: 10, 20, 30, 40
Removal Ratings (μm)
0.45, 1.0, 3.0, 5.0
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FBG | 045=0.45 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
1=1.0 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
3=3.0 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
5=5.0 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | |||
F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | |||
G=215/Flat | M=PTFE gasket (soft) |
