 |
| Quantity: | |
|---|---|
Polypropylene (PP)
Food and Beverage
The FBP series filter cartridge is made of microfiber PP filter material, long fiber spunbonded non-woven fabric and high purity PP skeleton. The filter cartridge realizes multi-layer filtration step by step. The Loongfiltech FBP filter cartridge has high flux and long service life. The filter cartridge has gone through a special post-treatment process, no fiber falling off and no impurities precipitation, which eliminates the pollution risk caused by the use of the filter cartridge.
Features and Benefits
Microfiber material with higher retention rate
No fiber shedding, low precipitation
Multi-gradient step by step filtration design
High dirt-holding capacity, long service life
Application
Sterilization filtration of beer and red wine
Sterilization filtration of mineral water and pure water
Sterilization filtration of soft drinks
Materials of Construction
Membrane: PP
Cage & Support & End Caps: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.41 m2 /10”
Dimensions
Outer Diameter: 68mm
Length（in）: 10, 20, 30, 40
Removal Ratings (μm)
0.1, 0.22, 0.45, 1.0, 3.0, 5.0, 10, 20
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FBP | 01=0.1 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
022=0.22 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
045=0.45 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
1=1.0 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
3=3.0 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
5=5.0 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
10=10.0 | G=215/Flat | M=PTFE gasket (soft) | ||||
20=20.0 |
The FBP series filter cartridge is made of microfiber PP filter material, long fiber spunbonded non-woven fabric and high purity PP skeleton. The filter cartridge realizes multi-layer filtration step by step. The Loongfiltech FBP filter cartridge has high flux and long service life. The filter cartridge has gone through a special post-treatment process, no fiber falling off and no impurities precipitation, which eliminates the pollution risk caused by the use of the filter cartridge.
Features and Benefits
Microfiber material with higher retention rate
No fiber shedding, low precipitation
Multi-gradient step by step filtration design
High dirt-holding capacity, long service life
Application
Sterilization filtration of beer and red wine
Sterilization filtration of mineral water and pure water
Sterilization filtration of soft drinks
Materials of Construction
Membrane: PP
Cage & Support & End Caps: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.41 m2 /10”
Dimensions
Outer Diameter: 68mm
Length（in）: 10, 20, 30, 40
Removal Ratings (μm)
0.1, 0.22, 0.45, 1.0, 3.0, 5.0, 10, 20
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FBP | 01=0.1 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
022=0.22 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
045=0.45 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
1=1.0 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
3=3.0 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
5=5.0 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
10=10.0 | G=215/Flat | M=PTFE gasket (soft) | ||||
20=20.0 |
